收藏本站
DATA SHEET ? SKY13347-360LF SPST SWITCH
Table 1. SKY13347-360LF Signal Descriptions
Pin #
1
N/C
Name
Description
No connection. May be connected to ground
Pin #
5
RF1
Name
Description
RF port 1. Must be DC blocked.
with no change in performance.
2
3
4
GND
GND
N/C
Ground
Ground
No connection. May be connected to ground
6
7
8
VS
V1
RF2
DC bias voltage. Refer to Table 4.
DC control voltage. Refer to Table 4.
RF port 2. Must be DC blocked.
with no change in performance.
Table 2. SKY13347-360LF Absolute Maximum Ratings
DC supply voltage
Control voltage
Input power
Storage temperature
Operating temperature
Parameter
V S
V 1
P IN
T STG
T OP
Symbol
Minimum
–40
–40
Maximum
6
V S
+32
+125
+85
Units
V
V
dBm
? C
? C
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION : Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Functional Description
Switching is controlled by a single control voltage on the V1 pin.
Depending on the logic applied to the control pin, the RF1 and RF2
signals (pins 5 and 8, respectively) are connected to each other
either by a low insertion loss path or a high isolation path.
Both RF ports of the switch require DC blocking capacitors. The
value of either blocking capacitor determines the low frequency of
operation.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13347-360LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
Typical performance characteristics of the SKY13347-360LF are
illustrated in Figures 3 through 7.
The state of the SKY13347-360LF is determined by the logic
provided in Table 4.
Skyworks Solutions, Inc. ? Phone [781] 376-3000 ? Fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com
2
October 12, 2010 ? Skyworks Proprietary Information ? Products and Product Information are Subject to Change Without Notice ? 201393A
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
SKY13352-337LF-EVB EVAL BOARD FOR SKY13352
SKY13353-337LF-EVB EVAL BOARD FOR SKY13353
SKY13384-350LF RF SWITCH 4GHZ SP4T
SKY13411-374LF-EVB EVAL BOARD FOR SKY13411
SKY65048-360LF IC AMP 0.7-1.2GHZ LN 8QFN
SKY65116-21 IC AMP LINEAR 390-500MHZ 12-MCM
SKY65137-11 IC AMPLIFIER FOR 802.11 SMD MCM
SKY65338-21 IC FRONT END 450-470MHZ 12-MCM
相关代理商/技术参数
SKY13347-360LF_EVB 制造商:Skyworks Solutions Inc 功能描述:Eval board for SKY13347-360LF, Bulk
SKY13347-360LFB 制造商:Skyworks Solutions Inc 功能描述:RF AND MICROWAVE SWITCH
SKY13348-374LF 功能描述:RF 开关 IC .5-6.0GHz SPDT IL .6dB @ 2.5GHz RoHS:否 制造商:M/A-COM Technology Solutions 开关数量:Single 开关配置:SPDT 介入损耗:0.6 dB 截止隔离（典型值）:43 dB 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PQFN-16 封装:Reel
SKY13348-374LF_EVB 功能描述:EVAL BOARD FOR SKY13348-374LF RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
SKY13348-374LFB 制造商:Skyworks Solutions Inc 功能描述:RF AND MICROWAVE SWITCH
SKY13350-385LF 功能描述:RF 开关 IC .01-5.0GHz SPDT IL .35dB @3.0GHz RoHS:否 制造商:M/A-COM Technology Solutions 开关数量:Single 开关配置:SPDT 介入损耗:0.6 dB 截止隔离（典型值）:43 dB 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PQFN-16 封装:Reel
SKY13350-385LFB 制造商:Skyworks Solutions Inc 功能描述:RF AND MICROWAVE SWITCH
SKY13350-385LF-EVB 功能描述:EVAL BOARD FOR SKY13350 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796